Desiccant Dehumidifier Accessories

For any of the Ebac Desiccant range you will generally require the use of high temperature flexible ducting though rigid ducting can be used if preferred. It is advisable to keep your ducting length as short as possible to maximise efficiency. The hot wet air outlet to an external area should be no longer than 2m with no sharp bends. Please refer to the PDF's for a better understanding of the accessory and installation methods & requirements.

EIPL DD200 Installation - Eipl DD200 General Assembly
EIPL DD300 Installation - Eipl DD300 General Assembly
EIPL DD400 Installation - EIPL DD400 General Assembly

70mm High Temp Flex Ducting

    Delivery time:2/3 Days
Add to cart
High temp Flexible Ducting - Price per M

2m maximum length recommended

A 70mm I/D hose is required for the DD200, DD300. This is the wet air outlet to discharge the wet air externally. The hose is designed for high temperature air and is available per metre. 

Please contact us to purchase.

102mm High Temp Flex Ducting

    Delivery time:2/3 Days
Add to cart
High temp Flexible Ducting - Price per M

2m maximum length recommended

A 102mm I/D hose is required for the DD400. This is the wet air outlet to discharge the wet air externally and for external air to be ducted from the outside to increase the efficiency of the larger machine

The hose is designed for high temperature air and is available per metre. 

Please contact us to purchase.

DD200 Process Air Duct Adaptor Plate

    Delivery time:2/3 Days
Add to cart

This adaptor is required if using flexible or rigid ducting to draw air from the space to be dehumidified.

Please contact us to purchase.


DD300 Process Air Duct Adaptor Plate

    Delivery time:2/3 Days
Add to cart

This adaptor is required if using flexible or rigid ducting to draw air from the space to be dehumidified.

Please contact us to purchase.


DD400 Process Air Duct Adaptor Plate

    Delivery time:2/3 Days
Add to cart

This adaptor is required if using flexible or rigid ducting to draw air from the space to be dehumidified.

Please contact us to purchase.


DD400 Regeneration Air Adaptor Plate

    Delivery time:2/3 Days
Add to cart

102mm air duct adaptor plate for the regeneration air inlet on a DD400

Please contact us to purchase

127mm i.d High Temp Flex Ducting

    Delivery time:2/3 Days
Add to cart

A 127mm I/D hose is required for the DD200, DD300 & DD400. This is for the internal air outlet and return air inlet within the dehumidified space. The hose is designed for high temperature air and is available per metre.

Please contact us to purchase.

Need help or advice?

For more product information or help with your reqirement please email or call 01225 436 236